We are your source for quality safety barricades, industrial safety, FME barriers (foreign material exclusion) and your worker and workplace safety solutions ranging from outdoor water and concrete barriers to secure your active roadways and heavy equipment to traffic cones and barricades to direct personnel and equipment through your work zones.
Whether you need indoor stanchions like barriers or outdoor barricades that enable you to mark off Foreign Material Exclusion (FME) zones, hazardous equipment and even warehouse loading docks with stanchions, cones, chain and tapes, we have a variety of solutions to meet your needs. We’ll support you from the outdoor industrial work area to the indoor machinery rooms to your loading docks to your restroom facilities with industrial rated safety equipment!
Visit us at www.CrowdControlExperts.com to view our full selection of stanchions, safety barricades, FME barricades, workplace safety solutions, water and concrete barriers or to speak with a Customer Service specialist, call 631-367-2005.
Visit us at www.TrafficSafetyExperts.com to view our full selection of safety cones, safety tapes, barriers and other industrial workplace safety solutions or to speak with a Customer Service specialist, call 631-367-2005.
Usually the first step in Foreign Material Exclusion is to set up a zone where material will be controlled. In a manufacturing site, that zone could be around specialized manufacuring equipment. In high rise construction that zone is anywhere that is elevated. In engine or turbine manufacturing that zone is set up around an open engine. Depending on zone size and location, different methods will be used to set up the zone. In any case the zones are distinguished and identified by FME Barriers.
Barricade tape provides a boundary where signage alone simply isn’t enough. It is good way to temporarily block access to a site that will only be worked on for a short period of time. Workspaces that are larger than a few feet can be identified effectively with barricade tape. The barrier or barricade tape should fit the color scheme and clearly mark the boundaries of the FME Zone. Text such as “FME Barrier” works well. Signage should be included at intervals around the barrier to indicate that the area is being protected from debris.
An FME barrier for an area that is located in a central area with little visual or physical separation from the surrounding elements requires a lot of barrier creation. In addition to clear signage and barrier tape, the zoned area may also require stanchion setup. Stanchions are great barriers for longer term work, when simple barricade tape may not last as long as the job itself. Again, signage should supplement the stanchion barrier.
Some FME jobs may employ the use of water filled or concrete barriers to form more of a permanent barrier. We have many options to enable you to safely secure your FME zone below.
Where mechanical handling equipment is used, OSHA states that sufficient safe clearances shall be allowed for aisles, at loading docks, through doorways and wherever turns or passage must be made. Aisles and passageways shall be kept clear and in good repairs, with no obstruction across or in aisles that could create a hazard. OSHA Program Directive #100-60, pertaining to the safety markings for aisles and passageways in a workplace specifically provides an interpretation of “appropriately marked” as applies to permanent aisles and passageways where there are dirt floors or floors having continuous concentrations of sand or fine dusts. In some instances, this directive has been narrowly interpreted to mean that aisles and passageways must be marked by painted floors lines.
According to OSHA, the intent of “appropriately marked” is not to restrict the markings to one method only. It would be impractical to paint lines on dirt floors or floors that have continuous concentrations of sand or other dusts. These conditions may exist in such industries as foundries, scrap salvage operations or motor winding facilities. They go on to state that painted lines remain the most feasible method of marking, where practical, since they may last several years without maintenance or repainting. Other appropriate methods such as marking pillars, powder stripping, flags, traffic cones, safety tape or barriers, stanchions or barrels are acceptable, when the training programs for vehicle operators and employees include the recognition of such markings.